#E47#E47
Q: Can
I add more header
information to AutoTest logfiles?
The "More..." Button
|
HiLevel AutoTest windows (TestBox, Prober, Handler, and Operator Console) save test results in a generic format. Often there is a need to include additional information in the header of these logfiles while testing, such as the operator name or test conditions. |
To facilitate this, HiLevel has a feature for adding More Information. The More Information window shown below is available from any automated test window (again, TestBox, Prober, Handler, and Operator Console) by clicking the “More…” button on that window. |
| The Field labeled “Part Number” on this window acts like a serial number for the devices under test. If you are testing parts in a lot that have sequential serial numbers, you can type the starting number in this field and check the Auto Increment box to increase this number by one each time the TestBox button is pressed (or each time the handler/prober advances to the next device). Simply fill in the fields and click “Save & Exit” to apply. An example of a logfile from the TestBox window, with this new header information, appears below. |
| Date: 10/20/2004 Time: 9:03:54 AM (9:03:54) --------------------------------------------- Part Number: 161 ---- Device# 1 ---- Part Number: 314 Operator: SW Environmental Conditions: Ambient Special Notes: Lot 14 Test: DutContinuity $ Passed $ Test 'Func': PS1 = 5.000 $ Passed $ Test 'voh': $ Passed $ Test 'vol': $ Passed $ Test 'IDDQ': $ Passed $ AC Test access: Pin 27 => $Passed @ 4.0ns (Range 0.0 to 12.0) AC Test access: Pin 28 => $Passed @ 4.6ns (Range 0.0 to 12.0) AC Test access: Pin 29 => $Passed @ 3.8ns (Range 0.0 to 12.0) AC Test access: Pin 30 => $Passed @ 3.4ns (Range 0.0 to 12.0) AC Test access: Pin 31 => $Passed @ 3.6ns (Range 0.0 to 12.0) AC Test setup: Pin 14 => $Passed @ 0.8ns (Range -12.0 to 8.0) AC Test setup: Pin 13 => $Passed @ 0.8ns (Range -12.0 to 8.0) AC Test setup: Pin 12 => $Passed @ 0.8ns (Range -12.0 to 8.0) AC Test setup: Pin 11 => $Passed @ 0.8ns (Range -12.0 to 8.0) ******************************************************** * * $$$$$$$$ SUMMARY REPORT $$$$$$$$ * ******************************************************** Total Devices: 1; Passed: 1; Failed: 0; Yield = 100% END OF TEST |
| Use of the “More…” button does not change your ATX file or the test flow in any way. If you wish to change the output format of your logfile, see Q'nApp #E48. |
________________________________
Qe47.zip is a zipped Word file of this Q'nApp.
Click your browser's Back button to return to the Q'nApps index.